gbpc1005 thru gbpc110 document number 88611 08-jul-05 vishay general semiconductor www.vishay.com 1 case style gbpc1 ~ ~ ~ ~ glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 3 a v rrm 50 v to 1000 v i fsm 60 a i r 5 a v f 1.0 v t j max. 150 c features ul recognition file number e54214 ideal for printed circuit boards typical i r less than 0.1 a high surge current capability high case dielectric strength 1500 v rms solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for switching power supply, home appli- ances, office equipment, industrial automation applications mechanical data case: gbpc1 epoxy meets ul-94v-0 flammability rating terminals: silver plated (e4 suffix) leads, solderable per j-std-002b and jesd22-b102d polarity: as marked, positive lead by belevled corner mounting torque: 10 cm-kg (8.8 inches-lbs) max. recommended torque: 5.7 cm-kg (5 inches-lbs) maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. electrical characteristics ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols gbpc 1005 gbpc 101 gbpc 102 gbpc 104 gbpc 106 gbpc 108 gbpc 110 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms bridge input voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward t c = 60 c (2) rectified output current at t a = 25 c (3) i f(av) 3.0 2.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 60 a rating for fusing (t < 8.3 ms) i 2 t 15 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 150 c parameter test condition symbols gbpc 1005 gbpc 101 gbpc 102 gbpc 104 gbpc 106 gbpc 108 gbpc 110 units maximum instantaneous forward voltage drop per leg at 1.5 a v f 1.0 v
www.vishay.com 2 document number 88611 08-jul-05 gbpc1005 thru gbpc110 vishay general semiconductor thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) bolt down on heat-sink with silicone thermal compound betw een bridge and mounting surface for maximum heat transfer with #6 screw (2) unit mounted on 4.0 x 4.0 x 0.11" thick (10.5 x 10.5 x 0.3 cm) al. plate (3) unit mounted on p.c.b. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads ratings and characteristics curves (t a = 25 c unless otherwise noted) maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4.0 v, 1 mhz c j 21 pf parameter symbols gbpc 1005 gbpc 101 gbpc 102 gbpc 104 gbpc 106 gbpc 108 gbpc 110 units typical thermal resistance per leg (1) r ja r jc 12 8.0 c/w figure 1. derating curve output rectified current figure 2. maximum non-repetitive peak forward surge current per leg ambient temperature (c) average forward output current (a) 0 50 100 150 0 1.0 2.0 3.0 4.0 5.0 case temperature, t c heatsink mounting 4.0 x 4.0 x 0.11" thk (10.5 x 10.5 x 0.3 cm) al. plate 60 h z resistive or inductive load ambient temperature, t a p.c.b. mounting 0.375" (9.5 mm) lead length number of cycles at 60 h z peak forward surge current (a) 1 10 100 0 10 20 30 40 50 60 1.0 cycle t c =60c single sine-wave figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg instantaneous forward volta g e ( v ) instantaneous forward current (a) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 20 t j =25c pulse width = 300 s 1% duty cycle percent of rated peak reverse voltage (%) instantaneous reverse current ( a) 0 20 40 60 80 0.01 0.1 1 10 50 100 t j = 125 c t j =25c
gbpc1005 thru gbpc110 document number 88611 08-jul-05 vishay general semiconductor www.vishay.com 3 package outline dimensions in inches (millimeters) figure 5. typical junc tion capacitance per leg reverse voltage (v) junction capacitance, pf 0.1 1.0 10 100 1 10 100 t j =25c f = 1.0 mh z vsig = 50mvp-p figure 6. typical transient thermal impedance per leg t, heating time (sec.) transient thermal impedance (c/w) 0.01 0.1 1 10 100 0.1 1 10 100 hole for #6 screw 0.158 (4.01) 0.142 (3.61) dia. 0.128 (3.25) 0.048 (1.22) 0.200 (5.08) 0.160 (4.06) 0.750 (19.05) min. 0.040 (1.02) typ. 0.094 (2.4) x 45 degrees 0.445 (11.30) 0.405 (10.29) 0.630 (16.00) 0.590 (14.98) ac ac polarity shown on side of case: positive lead by beveled corner 0.445 (11.30) 0.405 (10.29) 0.630 (16.00) 0.590 (14.98) 0.032 (0.81) 0.028 (0.71) dia. case style gbpc1
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
